结构与原理顶堆螺母组件由圆螺母及数个顶堆螺钉和一个硬质平垫组成，可用来直接替代传统的标准六角螺母。将其拧在螺栓、螺柱或带螺纹的杆、轴上，主螺纹将螺栓/螺柱上的圆螺母安置于硬质平垫上。圆螺母就位后，螺栓/螺柱的实际紧固通过手动工具拧紧主螺纹四周的顶堆螺钉即可，主螺纹承受纯拉力。（1）顶堆螺钉摩擦直径小，使用较小的钮矩即可产生巨大的加紧力By tightening the jackbolts,a strong thrust(axial)force is generated.This thrust force is directed against a hardened washer.Jackbolts against a hardened washer.Jackbolts have a smallfriction diameter and can therefore create a high thrust force with relatively little torqut input.（2）圆螺母可有效降低主螺纹应力而且可以直接替代标准螺母The loads are transferred through the nut body which is postitioned on the main thread by hand.（3）硬质平垫具有传递力及保护法兰面及本体的作用A hardened washer is used to transfer the force while protecting the flange face.（4）多个顶推螺钉的推力理与主螺栓帽的反作用力在法兰上产生巨大的夹紧力The thrust(axial)force of many jackbolts and the opposite reaction force of the main bo...
超级螺栓：螺栓连接问题的有效解决方案了解超级螺栓多顶推预紧器如何成为全球各地的原始设备制造商和终端用户螺栓连接的最佳选择。